4 – Routing & assignment : Monitoring54 TASCAM DM-3200 User’s ManualMonitoringThe DM-3200 provides comprehensive monitoringand metering facilities allowing both control roomand studio cue mixes to be produced.This section describes the monitoring procedures andsetup when working in stereo. When working withsurround mixes, there are obviously some importantdifferences, and these are described in “Surroundoperations” on page 75.Selecting the CR sourceThe four dedicated keys and indicators to the right ofthe meters allow instant switching of the controlroom monitor sources and the two PHONES outputs,which mirror the output from the control room moni-tor outputs.The first key is hard-wired to the stereo buss(STEREO) and cannot be changed.The next three keys, in order, default to the aux 1–2sends (typically used for studio cue), digital input 1(e.g. a stereo recorder) and the analog 2-track inputs(again, this could be a stereo master recorder).Figure 4.9: Monitoring and metering controls
