Tascam DM-3200 Owner's Manual

Also see for DM-3200: Quick reference Manual Software guide Application guide Release notes

Contents

4 – Routing & assignment : MonitoringTASCAM DM-3200 User’s Manual 55However, these assignments can be changed usingthe MONITOR screen:Move the cursor to the selection dial of any of thethree selectors, use the dial to select the source, andpress ENTER.The sources that may be selected for these monitorselectors are:• The eight aux sends• The four linked pairs of aux sends• The sixteen busses• The eight link buss pairs• The two digital stereo inputs• The analog 2-track input• OscillatorTIPThe three assignable monitoring buttons are providedwith “scribble strips” allowing you to mark the currentfunctions with an appropriate marker.The Follow LINK setting allows a stereo setting to bemade from a mono source, by following the linksbetween adjacent aux sends or busses.When this checkbox is off, and an unlinked odd-numbered aux send or buss is selected as the monitorsource, that source is output in mono from the moni-tor outputs.When this checkbox is on, and a linked odd-num-bered aux send or buss is selected as the monitorsource, that source is output from the left monitorchannel, and the linked even-numbered aux send orbuss is output from the right monitor channel.When a linked pair of sends or busses is selected asthe monitor source, this checkbox has no effect.The volume of the analog output to the control roommonitors is controlled using the dedicated CR vol-ume control.The DIM “smart key” (see “Smart keys” on page 16)lowers the level from the control room outputs whenactive. The amount by which the level is dimmed isset from this screen using the POD 2 encoder .NOTEMonitoring in surround mode is a different process,best achieved through use of the optional IF-FW/DMsurround monitor card.Studio cue sourceThe studio source may be set up to mirror the controlroom source by selecting the From CONTROL ROOMoption, or it may be set independently using theupper option.Turn the dial and press ENTER to make the selection.The options available here are:• The stereo buss• The four linked pairs of aux sends• The eight link buss pairs• The two digital stereo inputs• The analog 2-track input• The internal oscillator• The control room monitorTIPSince there are several options in the routing, etc. thatonly affect the aux 1–2 sends, we suggest that you usethese as a separate studio cue feed.The volume of the studio cue is adjusted from thisscreen using the POD 4 encoder.Figure 4.10: Monitor parameters screen