2 – Basic operational concepts : Special controlsTASCAM DM-3200 Owner’s Manual 19TIPYou can change between a white on black displayand a black on white display by using the ALT +FLIP key combination.POD knobs are also used on some screens to make aselection from a list. In these cases, the screen showswhat POD knob should be used to change the selec-tion:The POD keys are often used as soft keys to performan action, as shown on the bottom of the screen (on-screen buttons).Other screens may use them as buttons which displaya pull-up list of options. When the list is shown, theappropriate POD encoder, or the main dial, is used tonavigate through the list, and the POD key or ENTERkey is used to confirm the entry.The POD keys may also be used to select “sub-screens” from within a major heading. In this case,simply pressing the appropriate POD key jumps tothe next screen: as shown on the “tag”:TIPAs well as using the POD keys to switch between tabbedpages, you can also make repeated presses of the keythat was used to bring up the screen (with the ALTindicator lit if necessary) to change between thesepages.The POD keys may also be used to jump to anotherscreen with a different function.TIPThe POD knobs change values fairly coarsely, but bepressing and holding the SHIFT key (to the left of theunit), the POD knobs can be used for fine adjustment.This behavior can be changed (see “Encoder behavior”on page 23 below).Figure 2.4: POD knobs used in a multi-controlscreenFigure 2.5: POD knob 4 used as list selectorFigure 2.6: POD keys 2 through 4 used as soft keysFigure 2.7: POD 1 used with a pull-up menu listFigure 2.8: POD keys used to select sub-screensFigure 2.9: POD keys 2 and 4 used to jump toother screens (library screens)
