apfiff09 marine vacon • 10524- 67.4.2 Digital inputsP2.4.2.1 Start signal 1 ID403Signal selection 1 for the start/stop logic.This is for Start Place A, selected with P2.4.2.39Default programming A.1.Default Forward start.P2.4.2.2 Start signal 2 ID404Signal selection 2 for the start/stop logic.This is for Start Place A, selected with P2.4.2.39Default programming A.2. Default Reverse start.P2.4.2.3 Run enable ID407When run enable is removed from the drive coasting stop is made always.Drive will also show warning indication when run is disabled.Contact open: Start of motor disabledContact closed: Start of motor enabledP2.4.2.4 ReverseID412This reverse command is active when Start signal 2 is not used for reverse commandContact open: Direction forwardContact closed: Direction reverseP2.4.2.5 Preset speed 1 ID419P2.4.2.6 Preset speed 2 ID419P2.4.2.7 Preset speed 3 ID419Digital input selections for activating preset speeds.Speed Digital InputPreset speed 1Digital InputPreset speed 2Digital InputPreset speed 3Basic speed 0 0 0Preset Speed 1 1 0 0Preset Speed 2 0 1 0Preset Speed 3 1 1 0Preset Speed 4 0 0 1Preset Speed 5 1 0 1Preset Speed 6 0 1 1Preset Speed 7 1 1 1Related parameters- G2.2.7 Constant RefP2.4.2.8 Motor potentiometer DOWN ID417Contact closed: Motor potentiometer reference DECREASES until the contact isopened. See details in G2.2.11 Motor Pot.
