214 • Vacon apfiff09 marineTel. +35867.14 ID FunctionsListed here are the functions that use the parameter ID number to control and monitor the signal.7.14.1 Value ControlThe value control parameters are used to control an input signal parameter.P2.14.1.1 Control Input Signal ID ID1580With this parameter you can select what signal is used to control selected parameter.P2.14.1.2 Control Off LimitID1581This parameter defines the limit when the selected parameter value is forced to Offvalue.P2.14.1.3 Control On LimitID1582This parameter defines the limit when the selected parameter value is forced to Onvalue.P2.14.1.4 Control Off ValueID1583This parameter defines the value that is used when the used input signal is below Offlimit.P2.14.1.5 Control On ValueID1584This parameter defines the value that is used when the used input signal is above Onlimit.P2.14.1.6 Control Output Signal ID ID1585This parameter defines which parameter is forced to On and Off values when selectedinput signal exceeds the set limits.P2.14.1.7 Control Mode ID1586This parameter defines how the value control output behaves.0 = SR ABSAbsolute input value is used to make a step change in the output between On and Offvalues.OffvalueOnvalueControlOffvalueControlOnValueOffvalueOnvalueNegative Positive
