Configure a Server Fax RepositoryXerox WorkCentre 4250/4260 Series System Administration Guide 938. Click on [IP Address] or [Host Name], enter either the IP Address or Host Name ofthe computer where the Fax Repository (SMB Server/Workstation) is located.• Enter the Port Number, if required (Default is 139).NOTE: It is recommended that the default port setting is used.9. Enter the name of the [Share].10. Enter the Document Path from the Share to your specific folder in the [DocumentPath] entry box.For example, if the path is sharename/wc/scans, enter /wc/scans.11. Enter the User Account and Password in the [Login Name] and [Password] boxes.NOTE: The supplied Username must have permission to access the Fax folder.12. Enter the Password again in the [Retype password] entry box.13. Select the [Select to save new password] checkbox.14. Click on the [Apply] button to accept the changes.If prompted, enter the Administrator’s User ID [admin] and Password [1111], andclick on [Login].15. Continue to Optional Step: Configure Defaults – page 95.HTTP/HTTPSHTTP - This is used to fax to a Web Server.HTTPS - This is used to fax to a Secure Web Server.Information ChecklistBefore starting the Installation procedure, please ensure that the following items areavailable and/or the tasks have been performed:1. Ensure that web services and a web service (such as Apache) are running on theserver:a) The machine will send POST requests and scanned data to the Server forprocessing by a script.b) Write down the IP Address or Host Name of the Server.2. Download a sample script:a) At your Workstation, open the web browser, enter the IP Address of the machinein the Address bar.b) Press [Enter].c) Click on the [Properties] tab.d) Click on the [Services] link.e) Click on the [Fax] link.f) Click on the [Fax Repository Setup] link.g) Select [HTTP] or [HTTPS] from the Protocol drop-down menu.