Xerox 4250 - WorkCentre - Copier System Administration Manual

Also see for 4250 - WorkCentre - Copier: Features Specifications Quick use guide Evaluator guide User guide

Contents

CentreWare Internet ServicesXerox WorkCentre 4250/4260 Series System Administration Guide 9Setting the Ethernet speed at the machine1. Press the button on the machine to enter the Tools Pathway.2. Enter the Administrator’s Password. The default is 1111.3. Touch [Enter].4. Press the button.5. Touch [Tools].6. Touch [Connectivity and Network Setup].7. Touch [Advanced].8. Touch [Network Setting].9. Touch [Physical Media].10. Select the Speed to match the speed set on your hub or switch.11. Touch [Save].12. Press the button.13. Touch [Confirm] to exit the Tools Pathway.Printing a Configuration ReportFollow these steps to print a Configuration Report:1. Press the button on the Control Panel.2. Touch the [Information Pages] tab.3. Touch [System Configuration].4. Touch [Print].5. Touch [Close].CentreWare Internet ServicesCentreWare Internet Services is the embedded HTTP server application that resides in thedevice. Internet Services allows Administrators to change network and system settings onthe device from the convenience of their desktops.Many features available on your machine will need to be set via the machine and theCentreWare Internet Service.Many of the features available within Internet Services will require an AdministratorUsername and Password. The default Username is admin and the default Password is 1111.System ConfigurationTo use CentreWare Internet Services, you need to enable both TCP/IP and HTTP on themachine. See Configure Static IPv4 Addressing using the Machine User Interface on