Optional Step: Configure the Default TemplateXerox WorkCentre 4250/4260 Series System Administration Guide 658. Ensure that [File] is selected. Fax is reviewed later in this section.Fax DestinationsIf Server Fax is installed on your machine, you will be able to scan a document andautomatically have it sent to a fax number. You will see [Fax] as a filing destination service.These instructions describe how to add fax numbers to your Default Scan Template.NOTE: A Server Fax Repository must be setup prior to completing these steps. See Chapter9, Configure a Server Fax Repository on page 90.1. Click on the [Fax] checkbox.2. Click on the [Add] button in the Fax Destinations area to add a new fax destination.3. Enter the required fax number in the [Add Fax Number] box within the FaxRecipients area.4. Click on the [Add] button.NOTE: You can continue adding new fax numbers to build a Fax Distribution List.5. Click on [Delayed Send] in the Delivery area if you want to send the fax at a specifictime.6. Enter the time that you want the fax to be sent in the Time area.7. Click on the [Apply] button to accept the changes.If prompted, enter the Administrator’s User ID [admin] and Password [1111], andclick on [Login].Document Management Fields (Optional)This area enables you to add document management fields to the Default Template. Thisinformation is filed with your scanned documents in the Job Log. Third party applicationscan be used to search, file and distribute jobs based on their Job Log information.1. Click on the [Add] button to add a new field.2. Enter the information that you want to appear in the Document ManagementFields:a) Field Name (Required)The field name is not shown at the machine, but is used by third-party softwareto access the Document Management information.You must enter a name for the field name.Enter a field name up to 128 characters in length.b) User EditableDocument Management Fields can be setup so that the User may edit the valuefor the field at the machine.Choose one of the following:• [Editable] if the User is allowed to modify the field value.• [Not Editable] to hide the Document Management Field. The DefaultValue will be used instead.
