8 LDAP Configuration and Address Books82 Xerox WorkCentre 4250/4260 Series System Administration Guide3. Use an LDAP client to validate your settings before inputting them into the InternetServices menus. LDAP clients include Microsoft Outlook Express, Microsoft Outlookand Lotus Notes and other e-mail clients.4. To use host names, DNS must be configured on the machine.LDAP ConfigurationGeneral Settings1. At your Workstation, open the web browser, enter the TCP/IP Address of the machinein the Address bar.2. Press [Enter].3. Click on the [Properties] tab.4. Click on the [Connectivity] link.5. Click on the [Protocols] link.6. Select the [LDAP Directory] from the directory tree.7. Under the [Server Information] area, select either [IP Address] or [Host Name].8. Enter the IP Address and Port or the Host Name and Port of the LDAP Server.9. Enter details of an alternate LDAP server, if required, in the [Backup IP Address andPort] area.10. Enter the required information in the [LDAP Access] area:• Search Directory Root - allows you to limit the LDAP search by entering thelocation on the server where the LDAP information is stored.• Login Credentials to Access LDAP Server - Select either [System] or[Authenticated User] to access the LDAP server.11. In the [LDAP Bind] area, for [Bind Method] select either to make an [Anonymous]bind or a [Simple] bind.An [Anonymous] bind does not require a valid Login and Password to access theLDAP directories to perform lookups.A [Simple] bind requires a valid Login and Password to access the LDAP directories toperform lookups.12. Enter details in the [Login Name] and [Password] box.• Checkmark the [Select to save new password] box.• Checkmark the [Append base DN] enable box. When enabled the bind willappend the Root to Append string to the bind.NOTE: Many Unix/Linux LDAP servers require this attribute to be set and is usedfrequently when Login Credentials to Access LDAP Server is set to [AuthenticatedUser].13. Click on the [Secure LDAP via SSL] checkbox if you want to enable Secure LDAP.14. Enter and select information, as required in the [Search Criteria] section.
