SNMPXerox WorkCentre 4250/4260 Series System Administration Guide 151a) Return to the Machine Digital Certificate Management screen in the InternetServices Security menu.b) Click on [Upload Signed Certificate].c) Browse to the signed certificate file on your PC and click on the [Open] button.d) Click on the [Upload Certificate] button.e) If successful, the Current Status will display the message “A Signed Certificate isestablished on this machine.”NOTE: For the upload to be successful, the signed certificate must match the CSRcreated by the machine and must be in a format that the machine supports.Enable Secure HTTP (SSL)Once the machine has a machine Server Certificate, you can enable secure HTTP.1. In the Internet Services Properties menu, click on the [Connectivity] link.2. Click on the [Protocols] link.3. Click on the [HTTP] link.4. Click on the [Enable] checkbox in the Protocol area.5. Enter the HTTP [Port Number] if required. The default is 80.6. Select the [Require SSL] option in the [HTTP Security Mode] drop-down menu.7. Click on the [Apply] button to accept the changes.If prompted, enter the Administrator’s User ID [admin] and Password [1111], andclick on [Login].8. Close your web browser and then access the Internet Services screen again. TheSecurity warning will display. Self-signed certificates causes browsers to displaymessages which question the trust of the certificate. Click on the [OK] button tocontinue.SNMPSNMP (Simple Network Management Protocol) settings can be configured via InternetServices.1. At your Workstation, open the web browser, enter the TCP/IP Address of the machinein the Address bar.2. Press [Enter].3. Click on the [Properties] tab.4. Click on the [Connectivity] link.5. Click on the [Protocols] link.6. Click on the [SNMP] link.7. Click on the [Enable] checkbox.
