4 Fax/Internet Fax106 Xerox WorkCentre 7132 User GuideG3 AutoSelect this mode if the remote machine is G3 compatible. This mode is the one usuallyselected. The machine automatically switches modes depending on the capabilities ofthe remote machine.F4800Select this mode when transmitting over noisy or bad telephone lines, for examplewhen sending international faxes. Can also be useful for transmitting over poortelephone lines domestically.Priority Send/Delayed StartThese features allow you to set the priority and start time for fax and polling jobs.Although you can set [Delayed Start] in combination with [Priority Send], a fax will besent at the time specified using the [Delayed Start] option.1. Select [Priority Send/DelayedStart] on the [TransmissionOptions] screen.2. Select the required options.3. Select [Save].Priority Send• Off - Disables the feature.• On - Sends or polls the job prior to the already stored documents.Delayed Start• Off - Disables the feature.• On - Applies the delayed start time. When you select this option, [Start Time] isdisplayed at the right side of the screen.Start TimeDisplays the [Delayed Start - Start Time] screen where you can specify the delayedstart time.[Delayed Start - Start Time] ScreenAllows you to set the delayed start time using a 12-hour or 24-hour format. You cannotspecify a date for transmission.NOTE: The format of the start time can be set on the [Machine Clock/Timer] screen inthe [System Settings]. [AM]/[PM] is displayed only when the 12-hour format is used.For more information, refer to Machine Clock/Timers in the Setups chapter onpage 221.