8 CentreWare Internet Services170 Xerox WorkCentre 7132 User GuideComponentsDisplays the toner color and status of the black (K) and color (CMY) cartridges andremaining toner in 1% increments.NOTE: If the remaining toner becomes low, replace the toner cartridge.NOTE: Once the new toner cartridge is installed, a status of "Ready" is displayed.SMart KitsDrum CartridgeDisplays the remaining life of the drum cartridge in percentages.NOTE: If the remaining life percentage is low, replace the drum cartridge.Waste Toner ContainerDisplays the status of the waste toner container as [OK], [Almost Full], [Full], or [NotInstalled].NOTE: If [Replace Now] is displayed, replace the waste toner container.FuserDisplays the status of the fuser as [OK], [Replace Soon], or [Replace Now].NOTE: If [Replace Now] is displayed, replace the fuser.Transfer Belt CleanerDisplays the status of the Transfer Belt Cleaner as [OK], [Replace Soon], or [ReplaceNow].NOTE: If [Replace Now] is displayed, replace the Transfer Belt Cleaner.2nd Bias Transfer RollDisplays the status of the Second Bias Transfer Roll as [OK], [Replace Soon], or[Replace Now].NOTE: If [Replace Now] is displayed, replace the Second Bias Transfer Roll unit.Staple CartridgeDisplays the status of the staple cartridge as [OK], [Not Available], [Empty], or [Fault].NOTE: If [Replace Now] is displayed, replace with a new staple cartridge.JobsThis page displays a list of active and completed jobs sent using the protocols, or fromthe machine control panel. The details displayed may differ from those shown on thetouch screen of the machine. In addition to displaying details on the jobs, this pageallows you to delete jobs as well.
