Fault CodesXerox WorkCentre 7132 User Guide 403Fault CodesWhen a fault occurs, the touch screen displays a message on how to clear the fault.Some faults indicate customer maintenance, while others require the attention of theKey Operator and/or System Administrator. The following table represents some of thefault codes and their corresponding corrective actions. These may appear in the PrintQueue or Faults List available in the Machine Status mode.Code Description and Remedy002-770 The job template could not be processed due to insufficient hard disk space.Delete unnecessary data from the hard disk.003-750 No document was saved for the double-sided Booklet Creation feature. Checkthe setting of the double-sided Booklet Creation feature.003-751 The specified document area is too small. Select a higher resolution or a largerscan area.003-754003-755An error occurred in the document scanner. Reset the document, and scanagain.003-756 The fax document is completely white. Check that the original is not white, orthat the front and back sides have been reversed.003-760 Incompatible features are selected in the document scan conditions. Check theselected options.003-761 The paper size in the tray selected by auto tray switching, differs from the papersize in the tray selected at the tray selection. Either change the paper size forthe tray, or change the paper type priority setting.003-763 An error occurred when reading the Gradation Adjustment Chart. Place thechart properly on the document glass.003-780 Compression of scanned data was unsuccessful. Lower the resolution orreduction/enlargement ratio to reduce the data size, or send the document insmaller segments.003-795 The reduction/enlargement ratio exceeds the setting range when the scanneddocument is enlarged/reduced to the specified paper size. Directly enter thereduction/enlargement ratio, or change the paper size.003-981 Stapling mixed size documents is available only for documents with the samewidth. Cancel the staple feature or reset the documents with the same width.005-210005-275005-280005-283005-284005-285005-286An error occurred in the document feeder. Contact the Xerox Welcome Center.
