10 Setups242 Xerox WorkCentre 7132 User GuideEdge Erase - Left & Right EdgesSpecifies the defaults for left and right margins of the [Edge Erase] feature on the[Layout Adjustment] screen. Set the margins within a range of 0-50 mm (0-2.0 inches)using the scroll buttons.Image Shift - Side 1Specifies the default position of [Side 1] in the [Image Shift] feature on the [LayoutAdjustment] screen.Image Shift - Side 2Specifies the default position of [Side 2] in the [Image Shift] feature on the [LayoutAdjustment] screen.Image RotationSpecifies the default for the [Image Rotation] feature on the [Layout Adjustment]screen.Image Rotation DirectionSpecifies the default for [Image Rotation Direction] in the [Image Rotation] feature onthe [Layout Adjustment] screen.Original OrientationSpecifies the default for the [Original Orientation] feature on the [Layout Adjustment]screen.Copy OutputSpecifies the default for [Collation] in the [Copy Output] feature on the [Copy] screen.The options available vary depending on your machine configuration.Uncollated - Separators TraySpecifies the default for [With Separators]>[Paper Supply] in the [Copy Output] featureon the [Copy] screen.Output DestinationSpecifies the default tray for output. If the machine is equipped with the finisher, select[Center Output Tray], [Side Output Tray], or [Finisher Tray].NOTE: When the staple function is used, the output tray changes to [Finisher Tray]automatically.Stamp TextSpecifies the default for [Stamp]>[Text] in the [Annotation] feature on the [OutputFormat] screen.