10 Setups246 Xerox WorkCentre 7132 User Guide1. Select [Original Size Defaults]on the [Copy Mode Settings]screen.2. Change the required settings.Use the scroll buttons to switchbetween screens.3. Select [Close].Original Size 1 to 11Specifies the document sizes assigned to each of the 11 buttons.A/B Series SizeSpecifies standard document sizes in A/B series size. Use the scroll buttons to switchbetween screens.Inch SizeSpecifies standard document sizes in inches. Use the scroll buttons to switch betweenscreens.OthersSpecifies other miscellaneous sizes. Use the scroll buttons to switch between screens.Variable SizeSpecifies a user-defined size set using the scroll buttons.Reduce/Enlarge PresetsThis feature allows you to assign preset magnification buttons. These are displayedwhen you select [Preset %] in the [Reduce/Enlarge] feature on the [Copy] screen. If youpredefine frequently used magnifications, the original can be expanded or reduced,quickly and easily.1. Select [Reduce/EnlargePresets] on the [Copy ModeSettings] screen.2. Change the required settings.Use the scroll buttons to switchbetween screens.3. Select [Close].R/E Preset 1 to 7Specifies the reduce/enlarge ratios assigned to each of the seven buttons. Select from25 options in the range of 25-400%.