10 Setups248 Xerox WorkCentre 7132 User GuideNetwork SettingsThis section describes the features that allow you to change the default settings for thenetwork configuration. For more information on network setups, refer to the SystemAdministration Guide. For more information, refer to the following.NOTE: The options available may vary with the usage environment.Port Settings – page 248Protocol Settings – page 250Machine’s E-mail Address/Host Name – page 251Proxy Server Settings – page 252Outgoing/Incoming E-mail Settings – page 253Remote Server/Directory Service – page 255PKI (Public Key) Settings – page 259Other Settings – page 2611. Select [Network Settings] on the[System Settings] screen.2. Select the required option.3. Select [Close].Port SettingsThis feature allows you to set print mode, port status, communication mode, and autoeject time for the communication ports.1. Select [Port Settings] on the[Network Settings] screen.2. Change the required settings.Use the scroll bars to switchbetween screens.3. Select [Close].USBSpecifies whether to enable the USB port and to configure the relative parametersettings.Port StatusSpecifies whether to enable the USB port.Print ModeSpecifies the PDL to be used for print jobs. Only pre-installed PDLs are available.
