Output FormatXerox WorkCentre 7132 User Guide 731. Select [Covers] on the [OutputFormat] screen.2. Select the required options.3. Select [Save].No CoversDisables the feature.Front Cover OnlyInserts a front cover page before the first page of the document. A different paper typethan the main body pages can be used.Front & Back CoversInserts cover pages before the first page and after the last page of the document. Adifferent paper type than the main body pages can be used.Covers• Blank Covers - Adds a blank cover to the documents.• Printed Covers - Copies the first and last pages of the documents onto the coverstock. Add blank sheets to the set of documents if you want the inside front coverand inside back cover to remain blank.Paper Tray SettingsDisplays the [Covers - Paper Tray Settings] Screen. Select one of the presets to specifythe [Main Body Tray] and [Covers Tray]. The paper loaded in the trays selected for[Main Body Tray] and [Covers Tray] should be the same size and orientation. Fourpresets, including the bypass tray, are available for each, depending on your machineconfiguration. For more information on the bypass tray, refer to [Tray 5 (Bypass)]Screen on page 53.Transparency SeparatorsThis feature allows you to place blank page separators between documents whencopying onto transparency stock, and to make hard copy sets for handouts. Handoutscan be 1 sided or 2 sided and stapled.1. Select [TransparencySeparators] on the [OutputFormat] screen.2. Select the required option.3. Select [Save].No SeparatorsDisables the feature.
