Output FormatXerox WorkCentre 7132 User Guide 75PosterThis feature allows you to divide and enlarge an original document to copy the imageonto multiple sheets of paper. You can then paste them all together to make one largeposter.NOTE: This feature is unavailable when [Collated] or [Auto Output] is selected.1. Select [Poster] on the [OutputFormat] screen.2. Select the required option.3. Select [Save].NOTE: The machine automatically overlaps partitioned images when copying to allowfor cutting and pasting. The overlap width is set to 10 mm (0.4 inch).No PostersDisables the feature.Output SizeAllows you to select the size of poster you want to make from the presets that are listedon the touch screen. The machine automatically calculates the magnification, anddecides how many sheets are needed for the job.Enlargement %Use the scroll buttons to select the magnification rates for the length and width of aposter. The range can be set between 100-400% in 1% increments. The machineautomatically decides how many sheets are needed for the job.Paper Tray SettingsDisplays the [Poster - Paper Tray Settings] screen. Select one of the presets on thescreen to specify the tray for the job. Four presets, including the bypass tray, areavailable, depending on your machine configuration. For more information on thebypass tray, refer to [Tray 5 (Bypass)] Screen on page 53.Repeat ImageThis feature allows you to print an original image repeatedly onto one sheet of paper.1. Select [Repeat Image] on the[Output Format] screen.2. Select the required option.3. Select [Save].Single ImageDisables the feature.
