Safety NotesXerox WorkCentre 7132 User Guide 21Laser Safety InformationCAUTION: Use of controls, adjustments or performance of procedures otherthan those specified herein may result in hazardous light exposure.With specific regard to laser safety, the equipment complies with performancestandards for laser products set by government, national and international agencies asa Class 1 laser product. It does not emit hazardous light, as the beam is totally enclosedduring all phases of customer operation and maintenance.Operational Safety InformationTo ensure the continued safe operation of your Xerox equipment, follow these safetyguidelines at all times.Do These:• Always connect equipment to a correctly grounded power outlet. If in doubt, havethe outlet checked by a qualified electrician.Z This equipment must be connected to a protective earth circuit.This equipment is supplied with a plug that has a protective earth pin. This plug willfit only into an earthed electrical outlet. This is a safety feature. To avoid risk ofelectric shock, contact your electrician to replace the electrical outlet if you areunable to insert the plug into it. Never use a plug that lacks an earth connectionterminal to connect the product to an electrical outlet.• Always follow all warnings and instructions that are marked on or supplied with theequipment.• Always exercise care when moving or relocating equipment. Please contact yourlocal Xerox Service Department, or your local support organization to arrangerelocation of the product to a location outside of your building.• Always locate the equipment in an area that has adequate ventilation, and space forservicing. See installation instructions for minimum dimensions.• Always use materials and supplies specifically designed for your Xerox equipment.Use of unsuitable materials may result in poor performance.• Always unplug this equipment from the electrical outlet before cleaning.Do Not Do These:• Never use a plug that lacks an earth connection terminal to connect the product toan electrical outlet.• Never attempt any maintenance procedures that are not specifically described in thecustomer documentation.• This equipment should not be placed in a built-in unit unless proper ventilation isprovided. Please contact your authorized local dealer for further information.• Never remove covers or guards that are fastened with screws. There are nooperator serviceable areas within these covers.