Machine StatusXerox WorkCentre 7132 User Guide 317• Store Current Selections - Stores the current emulation settings in the selectedlocation. This overwrites any settings previously stored in that location.• Delete - Deletes the emulation mode settings from the selected location. Deletedsettings cannot be restored.Default ProgrammingSets the default emulation mode settings when the machine is turned on.1. Select [Default Programming]on the [HP-GL/2 Emulation]screen.2. Select the required option.• Factory Defaults - Restores the machine to the factory default settings.• Custom Settings - Sets the default settings to the selected settings.PDFAllows you to set parameter values and a password for PDF direct printing.NOTE: This feature is only available with the PostScript driver.1. Select [PDF] on the [Print Mode]screen.2. Select the required optionSetupAllows you to set emulation parameter item values for PDF direct printing. For a list ofPDF parameters, refer to PDF Direct Printing on page 163.1. Select [Setup] on the [PDF]screen.2. Enter a 3-digit parameter itemnumber in the [Item Number]field.3. Select [Change Value] to change the displayed value, or select [Confirm] if nochange is required.4. If you selected [Change Value], enter the required value in the [New Value] field.5. Select [Save].PasswordAllows you to enter a password to restrict access to PDF direct printing.
