Copy Mode SettingsXerox WorkCentre 7132 User Guide 239Copy TabThis feature allows you to define the functions of the paper tray buttons andmagnification buttons shown in [Paper Supply] and [Reduce/Enlarge] on the [Copy]screen.1. Select [Copy Tab] on the [CopyMode Settings] screen.2. Change the required settings.3. Select [Close].Paper Supply - Button 2 to 4Specifies the paper tray assigned to the paper tray buttons 2 to 4 shown in [PaperSupply] on the [Copy] screen. This allocation allows you to select easily the paper traysyou frequently use, with the exception of Trays 2 and 3 of the optional TTM.Reduce/Enlarge - Button 3 & 4Specifies the reduce/enlarge ratio assigned to the reduce/enlarge buttons 3 and 4shown in [Reduce/Enlarge] on the [Copy] screen. This allocation allows you to selecteasily the reduction/enlargement ratios you frequently use.The preset values of the [Reduce/Enlarge Presets] can be changed. For moreinformation, refer to Reduce/Enlarge Presets on page 246.Copy DefaultsThis feature allows you to set the default for each copy feature. The default set herereturns when the power is switched on, power save mode is cancelled, or the All> button is pressed. If you set a default for the features you frequently use, you canquickly copy documents without changing the settings each time.1. Select [Copy Defaults] on the[Copy Mode Settings] screen.2. Change the required settings.Use the side tabs to switchbetween screens.3. Select [Close].Paper SupplySpecifies the default for the [Paper Supply] feature on the [Copy] screen.NOTE: If the default for [Reduce/Enlarge] is set to [Auto %], [Auto] cannot be selectedfor [Paper Supply].