10 Setups244 Xerox WorkCentre 7132 User GuideBuild Job - Separators TraySpecifies the default for [Copy Job]>[Chapter Start]>[Separators Tray] of the [BuildJob] feature on the [Job Assembly] screen.Copy ControlThis feature allows you to implement operational control of the various copy features.1. Select [Copy Control] on the[Copy Mode Settings] screen.2. Change the required settings.Use the scroll buttons to switchbetween screens.3. Select [Close].Memory Full ProcedureSpecifies the default process to execute if the hard disk becomes full while readingdocuments. A message asking how to process the data read up to that point isdisplayed. You can predefine a processing method to be performed after the messagehas been displayed for a specified period. If you select [Cancel Job], the data will bediscarded. If you select [Run Job], the data read up to that point will be processed.Maximum Stored PagesSpecifies the maximum number of pages that can be stored in memory when you copydocuments. Select a number in the range from 1 to 999.Auto Paper OffSpecifies the paper tray used when you cancel [Auto] in the [Paper Supply] feature byselecting [Auto %] or [Independent X-Y%] in the [Reduce/Enlarge] feature.Mixed Sized Originals - 2 Sided CopySpecifies the copy operation when a different paper size is detected when making 2sided copies from mixed sized originals. Select [Copy to new sheet] to print to a newpage. Select [Copy to Side 2] to copy onto the reverse side of the current page.NOTE: Some areas of the image may be cropped if you select [Copy to Side 2].Fine-tune 100%Specifies the actual magnification ratio for making copies on the document glass when[100%] is selected on the [Reduce/Enlarge] screen. Fine tune the value in the range of98.0 to 102.0%.Background Suppress (Photo & Text)Specifies the background suppression level for the [Image Enhancement] feature when[Photo & Text] is selected on the [Original Type] screen when making color copies.
