u S6: Phase Order Selectionsn S6-01: Emergency Override SpeedSets the speed command used in emergency override mode when S6-02 = 0.No. Name Setting Range DefaultS6-01 Emergency Override Speed 0.00 to [E1-04] 0.00 Hzn S6-02: Emergency Override Reference SelectionSelects the frequency reference source for the Emergency Override function (H1-oo= AF or B0). Emergency Overrideignores faults such as oL2, oH1, oL1/oL2/oL3, EFoo, oH1/oH3/oH4, LL3, rH, oPr, CPF, PI faults, LF/LF2, UL3, PF, andany other faults, if possible.No. Name Setting Range DefaultS6-02 Emergency Override Reference Selection 0, 1 0Setting 0: Use S6-01 ReferenceSetting 1: Use AUTO Referencen S6-03: ov2 Detect TimeSets the detection time of ov2 in 0.1 s increments.No. Name Setting Range DefaultS6-03 ov2 Detect Time 0.0 to 1200.0 s 10.0 sn S6-07: Output Phase Loss Detection Level for Dynamic Audible Noise ControlSets the output phase loss detection level for Dynamic Audible Noise Control. Decrease the setting in steps of 10% whenoutput phase loss is detected erroneously. This setting rarely needs to be changed.No. Name Setting Range DefaultS6-07 Output Phase Loss Detection Level for Dynamic Audible NoiseControl 10.0 to 100.0% 100.0%1.11 S: Special ParametersYASKAWA SIEP YAIZ1U 03B YASKAWA AC Drive – Z1000 Programming Manual 1531 Parameter Details
