Yamaha F40BMHD Service Manual

Also see for F40BED: Rigging guide Owner's manual Service manual Service manual

LOWR6-29SHIMMING (EXCEPT FOR USA AND CANADA) E(4) Calculate the pinion gear shim thick-ness (T3).NOTE:• "P" is the deviation of the lower casedimension from standard. It is stampedon the trim tab mounting surface of thelower case in 0.01 mm units. If the "P"mark is missing or unreadable, assumea "P" value of "0", and check the back-lash when the unit is assembled.• If the "P" mark is negative (-), then addthe "P" value to the measurement.Example:If M is "11.70 mm" and "P" is "+5", then:T3 = 11.70 mm - 11.30 mm - (+5)/100= 0.40 mm - 0.50 mm= 0.35 mm (0.014 in)If M is "11.70 mm" and "P" is "-3", then:T3 = 11.70 mm - 11.30 mm - (-3)/100= 0.40 mm + 0.03 mm= 0.43 mm (0.017 in)(5) Select the pinion gear shim(s) (T3).F RP + 8Pinion gear shim thickness (T3) =M - 11.30 mm - P/100 mmCalculated numeralat 1/100th place Roundednumeralmore than or less0.00 0.02 0.020.02 0.05 0.050.05 0.08 0.080.08 0.10 0.10Available shim thickness0.10, 0.12, 0.15, 0.18, 0.30, 0.40and 0.50 mm