Yamaha F40BMHD Service Manual
Also see for F40BED: Rigging guideOwner's manualService manualService manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | |
Contents
|
BRKT7-28TILT CYLINDER ASSEMBLY EASSEMBLING THE TILT CYLINDERASSEMBLY1. Install:• Free pistonNOTE:Push the free piston down until it is fullycompressed at the bottom of the tilt cylin-der.2. Fill:• Tilt cylinderNOTE:Fill the cylinder with Power trim and tiltfluid. Add Power trim and tilt fluid until it isapproximately 15 mm below the last threadon the cylinder as shown.3. Install:• Tilt ram assemblyNOTE:When installing the tilt ram assembly.,make sure that the tilt ram is fully extended.4. Tighten:• Tilt cylinder end screw15 mma12Recommended Power trim and tiltfluidATF Dexron II1a2Tilt cylinder wrenchYB-06175-2B/90890-06544T R..Tilt cylinder end screw90 Nm (9.2 m• kgf, 66.4 ft• lb) |
Related manuals for Yamaha F40BED
manualsdatabase
Your AI-powered manual search engine