3Com Web Site Filter 1515 Select the days of the week that you want the update to take place.6 Click OK, to close the Filter List Update WIndow.The Update Now button on the Filter List Update command starts animmediate download of the filters without waiting for the next scheduleddownload time. You should click this when you first activate the license oryou start the 30 day trial.Setting Up the 3ComWeb Site FilterTo set up the 3Com Web Site Filter using the Web interface:1 Log in to the Web interface.2 Click Content Filter on the Toolbar.3 Select the Setup Filtering wizard in the Navigation Tree.4 Click Next.5 Select the 3Com Web Site Filter mode from the list.6 Click Next.7 Click the View License button to proceed.A window will appear requesting you to read and accept the terms of the3Com Web Site Filter Licence. Before the 3Com Web Site Filter can beenabled, you must accept the terms of the license.8 Click Done, after reading the licence to close window.9 Select Accept from the Setup Filtering wizard if you agree to the licenceterms.10 Click Next.11 Select the default rule to be applied to all web requests if the 3Com WebSite Filter service is not available or has expired.Choose Deny All to deny access to all Web sites or Allow All to allowaccess to all Web sites.12 Select the type of blocking and logging behavior for the Filter Log. TheFilter Log contains information about the clients who try to accessblocked sites, and the reason why the request has been blocked. Choosefrom Block Only; Log Only or Block and Log.For more information about the Filter Log, see the “Filter Logging”section on page 159.13 Click Next and then Finish to close the Setup Filtering Wizard.dua1611-5aaa04.book Page 151 Friday, November 29, 2002 8:56 PM
