Setting Up Allow Lists and Deny Lists 173 Each line in the file must not exceed 75 characters in length. Blank lines are ignored. There must be no spaces at the beginning of a line. The list can contain a maximum of 900 entries. If loading the fileresults in more than 900 entries, all subsequent entries after the limithas been reached will not be loaded into the list.You must follow all of the rules listed in “Domain Name System Syntax”and “IP Address Rules” in Chapter 1.Saving the NewAllow List orDeny ListYou can save the current list to an external text file. This allows you tomodify and then load the file back onto the Webcache using the Load ListFrom File command, or to load and re-use the list on another Webcache.To save the list:1 Log in to the Web interface.2 Click Content Filter on the Toolbar.3 Select Webcache Filtering > Allow/Deny Lists > Save List To File in theNavigation Tree.4 Select the list that you want to save. Choose Save Allow List or Save DenyList.5 Click Save. The File Download screen is displayed. Select Save this file todisk and enter a filename and location to store the saved list.Saving the list may take a few seconds to complete, depending on thenumber of entries being saved.Clearing theAllow List orDeny ListYou can use the Clear List command to delete all the current entries in theAllow List or Deny List.To do this:1 Log in to the Web interface.2 Click Content Filter on the Toolbar.3 Select Webcache Filtering > Allow/Deny Lists > Clear List in theNavigation Tree.4 Select which list you wish to clear. Choose Clear Allow List or Clear DenyList.5 Click OK to clear the Allow or Deny List.dua1611-5aaa04.book Page 173 Friday, November 29, 2002 8:56 PM