266 CHAPTER 18: C OMMAND L INE I NTERFACERestricting access does not change the caching operation of theWebcache. Only access to the Web interface, CLI via Telnet and SNMP isaffected.Changing the AdminPasswordYou can change the password for the admin user using the passwordcommand on the Security menu.To change the password, you need to login as the admin user and thenfollow the steps below:1 At the Top-level menu, enter:security passwordThe following prompt is displayed, allowing you to enter a newpassword:Enter the password:2 Enter the new password for the admin user.The following prompt is displayed, allowing you to re-enter the newpassword as confirmation:Re-enter the password:If you press Return without entering a password, the password is set to.3 A message is displayed informing you that the password has beensuccessfully changed.Enabling andDisabling PasswordRecoveryYou can enable or disable password recovery for the Webcache using thepwdRecover command on the Security menu. For further informationabout password recovery, see the “Securing Access to the WebcacheManagement Interfaces”chapter on page 103.CAUTION: 3Com recommends that you leave Password Recoveryenabled. If you disable it and subsequently forget the password for theadmin user name, you will have to return the Webcache to 3Com.To enable or disable password recovery:1 At the Top-level menu, enter:security pwdRecoverThe following example prompt is displayed:dua1611-5aaa04.book Page 266 Friday, November 29, 2002 8:56 PM
