Web Client Blocking 1656 Select Load to load the new list.Loading a list may take a few seconds to complete, depending on thenumber of entries being loaded.List RulesThere are certain rules that you must follow when loading a list of Webclients into the Web Client Blocking List. When loading a file into theWeb Client Blocking List, the file must be a plain text file with thefollowing restrictions: Each entry must be on a separate line. Each line must not exceed 32 characters in length. Blank lines are ignored. There must be no spaces at the beginning of a line. The Web Client Blocking List can contain a maximum of 900 entries. Ifloading the file results in more than 900 entries in the Web ClientBlocking List, all subsequent entries after the limit has been reachedwill not be loaded into the List.You must also follow all of the rules listed in “IP Address Rules” onpage 27.Saving the WebClient Blocking ListYou can save the current Web Client Blocking List to an external text file.This allows you to modify and then load the file back onto the Webcacheusing the Load List From File command, or to load and re-use the list onanother Webcache.To save the Web Client Blocking List:1 Log in to the Web interface.2 Click Content Filter on the Toolbar.3 Select Webcache Filtering > Web Client Blocking > Save List To File in theNavigation Tree.4 Click Save.5 The File Download screen is displayed. Select Save this file to disk andenter a filename and location to store the saved list.Saving a list may take a few seconds to complete, depending on thenumber of entries being saved.dua1611-5aaa04.book Page 165 Friday, November 29, 2002 8:56 PM