158 CHAPTER 10: U SING CONTENT F ILTERINGIt is important to use caution when adding keywords to the list as youmay filter sites other than you intend. For example, blocking the wordbreast may filter sites on breast cancer as well as objectionable orpornographic sites.5 Default Rule — The Webcache will filter according to the Default Rule(Allow All or Deny All). See “Default Rule” on page 159 for moreinformation.Setting Up ManualContent FilteringTo set up Manual Content Filtering using the Web interface:1 Log in to the Web interface.2 Click Content Filter on the Toolbar.3 Select the Setup Filtering wizard in the Navigation Tree.4 Click Next.5 Select the Manual Filtering mode from the list.6 Click Next.7 Select the default rule to be applied to all web requests that are notcovered by the Allow and Deny Lists (see “Setting Up Allow Lists andDeny Lists” on page 169) or Keyword Blocking (see “Setting Up KeywordBlocking Lists” on page 174).Choose Deny All to deny access to all Web sites except the ones that youenter in the list, or Allow All to allow access to all Web sites except thoselisted.8 Select the type of blocking and logging behavior for the Filter Log. TheFilter Log contains information about the clients who try to accessblocked sites. Choose from Block Only; Log Only or Block and Log.For more information about the Filter Log, see the Filter Logging sectionon page 159.9 Click Next and then Finish to close the Setup Filtering Wizard.The following sections apply to Manual Content Filtering: “Default Rule” on page 159 “Filter Logging” on page 159 “Web Client Blocking” on page 161 “Filter Exclusions” on page 166dua1611-5aaa04.book Page 158 Friday, November 29, 2002 8:56 PM
