Displaying and Changing Webcache Information and Functions 267The Password Recovery feature is enabled.Enter new value (enable,disable) [enable]:Displaying andChangingWebcacheInformation andFunctionsYou can display and change information about the Webcache using thecommands on the System menu. These commands allow you to: Initialize the Webcache to factory default settings Reboot the Webcache Specify a community string for the Webcache Specify a contact name for the Webcache Specify location details for the Webcache Specify a name for the Webcache Display summary information for the WebcacheInitializing theWebcacheYou can initialize the Webcache using the initialize command on theControl menu.To initialize the Webcache:1 At the Top-level menu, enter:system control initializeThe following prompt is displayed:WARNING: This command initializes the system to factorydefaults (excluding IP details) and causes a reset.Do you wish to continue (yes,no) [no]:2 Enter yes if you wish to proceed, or no if you want to stop theinitialization.What Happens During an Initialization?Initializing the Webcache returns it to its default (factory) settings, exceptfor the current IP and DNS configuration. All cached Web objects and theDNS cache are cleared. For further information see “Choosing a SuitableSite” on page 65.You may want to initialize the Webcache if it has previously been used ina different part of your network, and its settings are incorrect for the newenvironment.dua1611-5aaa04.book Page 267 Friday, November 29, 2002 8:56 PM
