7-14Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)[xxxxx0ab] Driver already loaded for this host bus adapterThe driver is already loaded for this adapter. Verify that the correctadapter is specified in your command line or startup file.[xxxxx0ac] Driver already loaded for all host bus adaptersThe driver is already loaded for all the supported adapters in thissystem.[xxxxx0a4] SCSI bus reset by third-party hardwareHardware such as an array enclosure may have reset the SCSI bus.This is a normal condition unless you receive additional errors.[xxxxx0a7] Unable to allocate memory[xxxxx0a8] Unable to allocate memoryThis indicates that there may be a problem with the amount ofmemory installed in your system. Verify that your system has atleast the minimum amount of memory required by your operatingsystem.[xxxxx0a9] Possible interrupt conflictThis indicates that the adapter IRQ conflicts with the IRQ ofanother board installed in your system. Check your hardwaredocumentation for instructions on setting and changing IRQs.[xxxxx0c9] Invalid command line parameterA command line option for the driver is invalid. See Using the LoadCommand Line Options on page 7-6 for valid command line options.
