4-13Installing Windows 2000[xxxxx023] Target device parity errorThe driver has detected a parity error by the target device.[xxxxx024] Data overrun or underrunThe adapter was given more or less data than the expected amountof data.[xxxxx031] Target device queue fullThe target device internal buffer is full.[xxxxx032] Target device busyThe target device reports a Busy status. Another program mayalready be using this device.[xxxxx050] Host adapter failure[xxxxxx9A] Host adapter failureYour host adapter may not be properly installed or is defective. Tryresetting the adapter in the PCI slot, or try installing it a differentPCI slot.[xxxxx081] Adapter initialization failure[xxxxxx8A] Adapter initialization failure[xxxxxx83] Adapter initialization failureAn error has occurred while the driver was setting up its internaldata structures. Verify that your adapter is supported by thisversion of the driver.[xxxxx089] Unable to allocate memoryThis indicates that there may be a problem with the amount ofmemory installed in your system. Verify that your system has atleast the minimum amount of memory required by your operatingsystem.[xxxxx096] Adapter hardware initialization failure—possible resource conflictThe driver has attempted to initialize the adapter hardware butfailed. This might suggest that an adapter resource (for example, anIRQ) conflicts with another board installed in your system.
