9-3Installing Sun SolarisInstalling the Driver when Solaris 8 is AlreadyInstalledTo install the driver when Solaris is already installed:Note: To update or install the driver, we recommend you doso in Single-User mode (System Maintenance Mode), backupimportant data. Refer to the Sun documentation forinstructions.1 Login as root or become super user. Backup kernel and originaldrivers in /platform/i386/kernel by typing:cp -r /platform/i386/kernel /platform/i386/kernelx2 Disable volume manager if it is running by typing:#/etc/init.d/volmgt stop3 Insert the Adaptec driver disk into the floppy disk drive.4 Mount the driver disk to a mount point (/mnt) by typing:#mount -F pcfs /dev/diskette /mnt5 Run install.sh script:#/mnt/DU/sol_28/i86pc/Tools/install.shYou will be notified if there is an Adaptec Ultra320 driveralready installed in your system. If you want to continue theinstallation, install script will backup the current Ultra320driver into /.ADPU320 directory.6 Unmount the disk by typing:#umount /mnt7 Verify if the newly installed Ultra320 driver is on your systemand you have the correct version by typing:#pkginfo -l ADPU320 (use uppercase ADPU320)
