9-4Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)8 Create /reconfigure file by typing:#touch /reconfigureThis will cause the operating system to check for newlyinstalled devices on the next system boot.9 Reboot the system by typing:#shutdown -i0 -g30 -yThe shutdown options are:■ ’-i0’ to bring system to 0 init state.■ ’-g60’ to shut the system down in 60 seconds.■ ’-y’ continue to shutdown withou user intervention.10 Follow the hardware instructions, turn off the system theninsert the Adaptec Ultra320 controller into one of the PCI slots.11 If you forgot to create a /reconfigure file, on the next boot screen,enter the boot option as follows:’b -r’This boot option will also cause the operating system to checkfor newly installed devices.Removing the Driver From Solaris 8If you no longer need the driver, you can use the followingprocedure to remove it:1 Make sure your Adaptec Ultra320 controller is not the bootcontroller and login as root or become super user.2 Remove the driver by typing:#pkgrm ADPU320 (use uppercase ADPU320)3 Follow the on-screen instructions for removing the driver.4 Create /reconfigure file by typing:#touch /reconfigureThis will cause the operating system to check for removeddevices on next system boot.
