8-10Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)Error MessagesThe error messages listed below are the messages associated withthe drivers. Messages are listed sequentially according to the lastthree digits of the error code. For example, [xxxxx020], [xxxxx021],[xxxxx022], and so forth.Note: When reporting problems to Customer Support, be sureto include the complete error code in your problemdescription.[xxxxx003] Command completed with error[xxxxx004] Command completed with error[xxxxx005] Command completed with error[xxxxx006] Command completed with error[xxxxx007] Command completed with error[xxxxx008] Command completed with error[xxxxx009] Command completed with errorA request issued to a target device completed with an indicationthat there is an error. In most cases, the error is recovered andnormal operation continues.[xxxxx010] Error issuing commandAn error has occurred while the driver was setting up its internaldata structures. Try installing the most up-to-date version of thedriver available from the Adaptec Web site.[xxxxx011] Error issuing commandThe requested command is not supported by this driver.[xxxxx012] Error issuing commandThe driver does not recognize the target device.[xxxxx013] Error issuing command[xxxxx014] Error issuing commandAn error has occurred while the driver was setting up its internaldata structures. Try installing the most up-to-date version of thedriver available from the Adaptec Web site.[xxxxx015] Error issuing commandAn error has occurred with the driver. Try installing the most up-to-date version of the driver available from the Adaptec Web site.
