8-6Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)3 Type y and press Enter when the computer asks if you reallywant to shut down. System Is Down should appear on the screen.The UnixWare/Open Unix kernel is now ready for host adapteroperation.Boot the New KernelTo reboot the computer with the new kernel:1 Follow the on-screen instructions (usually by pressing Enter) toreboot your computer.2 Check the bootup messages to verify that all your installed SCSIdevices are listed.If some or all of your installed SCSI devices do not appear atthis time, your SCSI cables may be loose, or the SCSI devicesetup may not be complete. If so, go back and correct anyproblems before proceeding.3 Wait for UnixWare/Open Unix to complete bootup with thenew kernel.Refer to Troubleshooting on page 8-9 if the computer crashes or ifpanic (UnixWare/Open Unix ) messages appear during bootup.The updated driver for UnixWare/Open Unix should now beready to use.
