7-8Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)Using NetWare and the Host AdapterThis section contains useful information on using NetWare andyour host adapter.Using Removable MediaThe adpu320.ham driver module fully supports removable-mediadisk drives, including magneto-optical drives. Removable media istreated as a standard SCSI hard disk, with some exceptions:■ The driver recognizes and registers only media with512 bytes/sector.■ NetWare allows you to mount/dismount the media and tolock/unlock the media.NetWare’s monitor.nlm program supports several removable-mediaoptions. To view and configure these options:1 Load monitor.nlm to display the various options.2 Select Disk Information. All system disk drives appear.3 Select the removable-media device. The following drive statusitems appear:Menu Choice Default Value1. Volume Segments On Drive11 Valid for both removable and nonremovable types of SCSI disk drives.(select for list)2. Read After Write Verify 1 Hardware Level3. Drive Light Status 1 Not Supported4. Driver Operating Status 1 Active5. Removable Drive Mount Status 22 Valid for removable media only.Mounted6. Removable Drive Lock Status2 Not Locked
