3-11Configuring the Adaptec SCSI Card 39320D with SCSISelect4 The Options menu appears. Select Configure/View SCSIController Settings. (For details on Using SCSI Disk Utilities, seepage 3-15.)The Configuration menu appears. The Configuration menudisplays the current settings for the SCSI bus interface. The BIOSInformation section at the bottom of the menu displays theInterrupt (IRQ) channel and I/O Port Address of the selecteddevice. This section cannot be modified.Note: Text displayed in yellow is for information only andcannot be selected.Adaptec SCSISelect(TM) Utility v4.00.0Arrow keys to move cursor, to select option, to exit (*=default)Would you like to configure the SCSI card or run theSCSI disk utilities? Select the option and press .ASC-39320D at slot 6, 00:0E:000OptionsConfigure/View SCSI Controller SettingsSCSI Disk UtilitiesArrow keys to move cursor, to select option, to exit (*=default)SCSI Bus Interface DefinitionsSCSI Controller ID .................................................SCSI Controller Parity ..........................................SCSI Controller Termination .................................Additional OptionsBoot Device Configuration......................................SCSI Device Configuration ..............................Advanced Configuration Options ..................... - Reset to SCSI Controller Defaults7EnabledAutomaticPress Press Press Adaptec SCSISelect(TM) Utility v4.00.0ASC-39320D at slot 6, 00:0E:00BIOS InformationConfigurationInterrupt (IRQ) Channel.................................10I/O Port Address............................................FC00h, F000h
