8-13Installing UnixWare and Open Unix[xxxxx096] Adapter hardware initialization failure - possible resource conflictThe driver has attempted to initialize the adapter hardware butfailed. This might suggest that the adapter resources (for example,IRQ) conflict with another board installed in your system.[xxxxx097] Unable to allocate memoryThis indicates that there may be a problem with the amount ofmemory installed in your system. Verify that your system has atleast the minimum amount of memory required by your operatingsystem.[xxxxx098] Exceeded maximum number of host bus adaptersThe driver has detected more host bus adapters than is supportedby this version of the driver or operating system.[xxxxx0a4] SCSI bus reset by third partyHardware such as an array enclosure may have reset the SCSI bus.This is a normal condition unless you receive additional errors.[xxxxx0a5] SCSI bus reset by host adapterThe host adapter may have reset the SCSI bus. This is a normalcondition unless you receive additional errors.[xxxxx0cf] System configuration errorThe driver encountered an error with your hardware. Refer to yourhost adapter’s user’s guide for troubleshooting information.[xxxxx0d0] Command timeoutThe target device is either busy, not ready, malfunctioning, or isnot present. Refer to your host adapter’s user’s guide fortroubleshooting information.[xxxxx0d7] Target device scan failedThe driver encountered an error scanning the target device. Referto your host adapter’s user’s guide for troubleshootinginformation.
