MIB Navigator3-2Local Management User’s GuideMIB Navigator ScreenAccess the MIB Navigator screen from the Main Menu screen using Local Management (refer tothe Accessing Local Management section in Chapter 1). Using the arrow keys, highlight theMIB NAVIGATOR menu item, then press ENTER. At the MIB Navigator cursor, type Help andpress ENTER. The MIB Navigator Help screen shown in Figure 3-1 displays.Figure 3-1 MIB Navigator Help ScreenManaging Device MIBsThe MIB Navigator lets you manage objects in the HSIM or CyberSWITCH ManagementInformation Bases (MIBs). MIBs are databases of objects used for managing the device anddetermining the device’s configuration. The commands within the MIB Navigator enable you toview and modify a device’s objects.Welcome to MIB NavigatorMIBNav-> helpCommands Available to the User :Navigation commands :branch cd ctron dir get grepls mib2 next pwd set sutree wan whoamiPPP Security Configuration:pppsecuritySpoofing activation/setup command:setspoofIsdn configuration, primary/backup setup commands :setbackup setisdnbri setswitchtype ctdt setidletimeout setalarmtime setmaxprofilessetdemandif isdnstat icOther commands :arp bridge circuitmap defroute dhcp ds1alarmfr imux nat netstat ping pppredistribute reset route secondIP show snmpbranchsnmpget snmpnext snmpset snmptree traceroute wanpqSPECIAL :done, quit, or exit - Exit from the MIB Navigator.mib2 - Change directory to MIB II (/1/3/6/1/2/1).ctron - Change directory to Cabletrons MIB (/1/3/6/1/4/1/52)wan - Change directory to Cabletrons WAN MIB (/1/3/6/1/4/1/52/4/1/2/7/2)For help with a specific command, type 'help '.MIBNav->
