Cabletron Systems CyberSWITCH CSX400 User Manual

Also see for CyberSWITCH HSIM-W6: Setup guide Configuration guide User guide Installation guide

Contents

Local Management1-26Local Management User’s GuideThe following definitions explain each of the Flash Download screen fields.Download Method — Use this field to select the method you wish to use to download thefirmware image to the HSIM or CyberSWITCH.• Reboot After Download — This field displays when the RUNTIME Download Method ischosen. Selecting YES forces the HSIM or CyberSWITCH to reboot and use the new firmwareimage immediately. Selecting NO allows the HSIM or CyberSWITCH to continue using theexisting firmware image without interrupting network operation.• Commit to Flash — This field displays when the BOOTPROM Download Method is chosen.Selecting YES allows the HSIM or CyberSWITCH to continue using the existing firmwareimage without interrupting network operation and selecting NO allows the HSIM orCyberSWITCH to reboot and use the new firmware image immediately.• TFTP Gateway Server IP — This field displays when the BOOTPROM Download Methodis chosen. Use this field to enter the IP address of the TFTP Gateway Server.Last Image Server IP — Displays the IP address of the last server used to download a firmwareimage to the HSIM or CyberSWITCH.Last Image File Name — Displays the file name of the last firmware image downloaded to theHSIM or CyberSWITCH.Download Server IP — Use this field to type in the IP address of the server from which you wishto download the firmware image.Download File Name — Use this field to type in the file name of the firmware image you wish todownload to the HSIM or CyberSWITCH.Selecting a Flash Download Method1. Use the arrow keys to highlight the Download Method field.2. Press the SPACE bar or BACKSPACE to select a flash download method.• If you select RUNTIME, the Reboot After Download field displays.• If you select BOOTPROM, the Commit to Flash field and the TFTP Gateway Server IPfield display.