Cabletron Systems CyberSWITCH CSX400 User Manual

Also see for CyberSWITCH HSIM-W6: Setup guide Configuration guide User guide Installation guide

Contents

IPX Configuration ScreenLocal Management User’s Guide1-51If you type in an invalid port number the error message: “PORT NUMBER IS OUT OF RANGE”displays. Perform steps 1 and 2 again.Entering the IPX AddressAll IPX hosts must have an IPX Address for each network interface. These addresses identify eachnetwork connection.To enter the IPX Address for a router port, complete the following steps:1. Use the arrow keys to highlight the IPX ADDRESS option.2. Type in the IPX Address in Dotted Decimal Notation (DDN) format and then press ENTER.Selecting the Frame Type for a PortOn each port, Frame Type specifies the format of the frame in which IPX packets are encapsulatedfor transmission. The Frame Type options available for each router port are dependent on the typeof media supported by that router port. Select the Frame Type based on your implementation, suchas Encap-enet for bridging and Native-wan for routing. The choices are: Ethernet, SNAP,i8022,Slip, Novell, Localtalk, Native-wan, Encap-enet, Encap-enet-8022, Encap-enet-snap,Encap-enet-novell, Encap-tokenring-8022, Encap-tokenring-snap, Encap-fddi-8022,Encap-fddi-snap, Other.To select the Frame Type for a port, complete the following steps:1. Use the arrow keys to highlight the Framing option.2. Use the ENTER key to toggle the entry to the correct Frame Type for the port.3. Use the arrow keys to highlight the SAVE command field at the bottom of the screen and thenpress ENTER. The message “SAVED OK” displays.NOTEYou can type in the port number, or you can use the +PORT- option at the bottom ofthe screen to scroll through the list of the ports on your device. To use the +PORT-option, use the arrow keys to highlight the + (to go forward), or the - (to go backward),and then press ENTER to scroll through the available ports in the direction you haveselected. You can also use the + and - keys to scroll through the available ports.