Cabletron Systems CyberSWITCH CSX400 User Manual

Also see for CyberSWITCH HSIM-W6: Setup guide Configuration guide User guide Installation guide

Contents

Appendix C: WPIM-DI ConfigurationC-4Local Management User’s GuideFigure C-3 Sample Timeslot ConfigurationSite #1 is using the full T-1, so all the timeslots must have an Interface assignment. Site #2 and Site#3 only use a fraction of the T-1, but the total quantity of timeslots must match those of Site #1.Unused timeslots receive an Interface number of 000.NOTEWhen the Drop-and-Insert function is enabled, and the WPIM-DI Physical Configurationscreen is saved, the timeslots will display “DI” to reflect that these timeslots are mappedto the DI interface. If the Drop-and-Insert function is disabled, the timeslots will display“000” in the Timeslot Configuration table when the screen is saved.In order to map unused timeslots to another device connected to the DI port of theWPIM-DI, the DI Enable option on the WAN Physical Configuration screen must be setto On.148203005005000005005000005005000005005000005005000005005000005005000005005000SITE #201-0809-1617-24SITE #301-0809-1617-2400000000600000000600000000600000000600000000600000000600000000600000000601-0809-1617-24000000006000000006000000006000000006000000006000000006000000006000000006SITE #1BSITE #1A01-0809-1617-24005005D/I005005D/I005005D/I005005D/I005005D/I005005D/I005005D/I005005D/I