Local Management1-28Local Management User’s GuideBOOTPROM DownloadIf you select a BOOTPROM Download, perform the following steps:1. Use the arrow keys to highlight the Commit to Flash field.2. Press the SPACE bar or BACKSPACE to select one of the following:• YES, if you want the HSIM or CyberSWITCH to continue using the existing firmwareimage without interrupting network operation. The HSIM or CyberSWITCH stores the newfirmware image in flash memory. When you reset the HSIM or CyberSWITCH, it bootsfrom flash memory using the new image.• NO, if you want the HSIM or CyberSWITCH to reboot and use the new firmware imageimmediately.3. Use the arrow keys to highlight the Download Server IP field.4. Type the IP address of the download server and press ENTER.5. Use the arrow keys to highlight the Download File Name field.6. Type the complete path and filename of the new image file to be downloaded. You must includeall directories and subdirectories involved in accessing the file. Type the new entry over theprevious entry. For example: c:\images\cyberswitch\11011.hex.7. Press ENTER.8. Use the arrow keys to highlight the TFTP Gateway Server IP field.9. Enter the IP address of the TFTP gateway server.10. Use the arrow keys to highlight the EXECUTE command located at the bottom of the FlashDownload screen. The HSIM or CyberSWITCH attempts to download the file using the IPaddress, filename, and path provided. This file is assigned to the Flash memory of the HSIM orCyberSWITCH.NOTEThe WAN Setup portion of Local Management is detailed in Chapter 2, WANConfiguration.
