Local Management OverviewLocal Management User’s Guide1-113. Repeat steps 1 and 2 until the Main Menu screen displays.4. Use the arrow keys to highlight the EXIT command at the bottom of the Main Menu screen.5. Press ENTER. The HSIM or CyberSWITCH Local Management Password screen displaysand the Local Management session ends.Establishing a TELNET ConnectionThe HSIM or CyberSWITCH is shipped with a temporary IP Address of 192.168.254.254 so thatyour computer can communicate with it over your Local Area Network (LAN) through a TELNETconnection. However, to establish a TELNET connection, your computer must be on the samesubnet as the HSIM or CyberSWITCH. Cabletron Systems recommends that you assign atemporary IP Address of 192.168.254.253 to your computer to ensure that both devices are on thesame subnet. TELNET connections to the host device require the community name passwordsassigned at the SNMP Community Names screen or if you are doing an initial configuration, youcan use the default password public.Local Management Screen HierarchyLocal Management consists of a series of menu screens that provide a path to each of the LocalManagement function screens. Navigate through Local Management by selecting items from themenu screen. Figure 1-3 shows the hierarchy of the Local Management screens.Figure 1-3 Hierarchy of Local Management ScreensNOTESee the instructions included with the TELNET application for information aboutestablishing a TELNET session.Main MenuPassword Setup MenuSystem LevelSNMP Community NamesSNMP TrapsMIB NavigatorFlash DownloadBridge SetupRouter SetupWAN Setup IPIPXIP General ConfigIP RIPIPX General ConfigIPX RIPIPX SAPIP OSPF2012_20
