DetailedDescriptionCMC is unable to obtain the link tuning information for the newly installed hardware (server,Input Output Module, or Mezzanine card), or is unable to send the link tuning information toiDRAC.RecommendedResponse ActionMake sure that the currently installed CMC firmware is the latest. Otherwise, update the CMCwith the latest CMC firmware and retry the operation.Category System HealthSubCategory CMC = Chassis Management ControllerSeverity Severity 2 (Warning)Trap/EventID 2546LCD Message No LCD message display defined.Initial Default. SNMP Alert;#EMAIL Alert;#LC Log;#Remote System LogFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetTRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSECMC8529Message Unable to perform the requested action on the server-arg1, because of insufficient privileges.Arguments •arg1 = slot numberDetailedDescriptionThe user account does not have sufficient privileges to perform the requested operation.Server Administrator privilege is required to perform the requested action.RecommendedResponse ActionUse a different user account that has Server Administrator privilege, and retry the operation.For more information, contact your system administrator or service provider.Category AuditSubCategory CMC = Chassis Management ControllerSeverity Severity 2 (Warning)Trap/EventID FALSELCD Message No LCD message display defined.Initial Default. LC LogFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetFALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSECMC8531Message Unable to perform the requested action on the sleevearg1because of insufficient userprivileges.119
