Category System HealthSubCategory PST = BIOS POSTSeverity Severity 1 (Critical)Trap/EventID FALSELCD Message Shut-down test failed. Power cycle systemInitial Default. FALSEFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetFALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSEPST0193Message BIOS POST memory test failed.DetailedDescriptionSystem BIOS POST memory test failed. This exception occurred early in system power on, thusthe system may not display video. (BIOS POST exception code C1)RecommendedResponse ActionCompare system memory installation to supported system memory configurations. Reducesystem configuration to minimum memory configuration.Category System HealthSubCategory PST = BIOS POSTSeverity Severity 1 (Critical)Trap/EventID FALSELCD Message BIOS POST memory test failed. Check memory devicesInitial Default. FALSEFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetFALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSEPST0194Message Remote access controller configuration failed.DetailedDescriptionSystem BIOS could not configure the Remote Access controller This exception occurred earlyin system power on, thus the system may not display video. (BIOS POST exception code C2)RecommendedResponse ActionCycle input power and power on the system. If the problem persists, contact technical support.Refer to the product documentation to choose a convenient contact method.Category System HealthSubCategory PST = BIOS POSTSeverity Severity 1 (Critical)505
