Severity Severity 1 (Critical)Trap/EventID FALSELCD Message No LCD message display defined.Initial Default. LC LogFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetFALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSECMC8545Message Detected a missing process failover condition detected. Process =arg1.Arguments •arg1 = process nameDetailedDescriptionA firmware error has occurred causing a CMC failover. The process identified in the messagewas not detected. The CMC will restart automatically.RecommendedResponse ActionNo response action is required. If multiple failovers occur, contact your service provider.Category AuditSubCategory CMC = Chassis Management ControllerSeverity Severity 1 (Critical)Trap/EventID FALSELCD Message No LCD message display defined.Initial Default. LC LogFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetFALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSECMC8546Message Issues identified witrh Processarg1. Failover condition detectedArguments •arg1 = process nameDetailedDescriptionA firmware error has occurred in the internal firmware process identified in the message. Thiscondition will cause a CMC failover to occur. If the issue persists, contact your serviceprovider.RecommendedResponse ActionNo response action is required. A failover may result from this condition. If multiple failoversoccur, contact your service provicer.125
