SubCategory ENC = Storage EnclosrSeverity Severity 3 (Informational)Trap/EventID 4339LCD Message No LCD message display defined.Initial Default. SNMP Alert;#LCD;#Remote System LogFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetTRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSEENC31Message Firmware download onarg1has failed.Arguments •arg1 = Enclosure NameDetailedDescriptionThe system was unable to download firmware to the enclosure. The controller may have lostcommunication with the enclosure. There may have been problems with the data transfer orthe download media may be corrupt.RecommendedResponse ActionAttempt to download the enclosure firmware again. If problems continue, verify that thecontroller can communicate with the enclosure. Make sure that the enclosure is powered ON.Refer to the storage hardware documentation for information on checking the cables.Category StorageSubCategory ENC = Storage EnclosrSeverity Severity 2 (Warning)Trap/EventID 4338LCD Message No LCD message display defined.Initial Default. SNMP Alert;#LCD;#Remote System LogFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetTRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSEENC32Message Storage Enclosure Processor (SEP) forarg1has been rebooted.Arguments •arg1 = Enclosure NameDetailedDescriptionThe SEP has been rebooted as part of the firmware download operation and will be unavailableuntil the operation completes.227
